Know how to make a DIY solar charger for your cell phones here. Communication is vital in emergency situations that’s why knowing this skill can be your saving grace!
DIY Solar Charger for Your Cell Phones | A Step-by-Step Guide
The Importance of Cell Phones
You can be left without electricity for an extended amount of time for multiple reasons. Blackouts, fallen power lines, being in a survival situation, or just going on a camping trip can leave you an outlet short to juice up your technology.
Quickly, your phone battery is drained, and your device becomes useless. We have a solution to this problem, and it comes in the form of a portable, rechargeable, DIY solar-powered cell phone charger.
Step 1: Gather the Materials
You’ll need the following materials to make this DIY solar-powered phone charger:
- A short length of stranded wire
- Micro USB cable with a stripped end
- 7805 regulator chip
- 4-port USB hub
- USB power bank
- Solar panel
RELATED: DIY Portable Solar Generator
Step 2: Solder & Mount the Regulator
The regulator plays an important role in this solar phone charger as it charges the power bank. It also prevents damage to the power bank’s internal due to overvoltage.
Using solder, join the USB plug with the regulator and then join two stranded wires on the regulator for your solar panel (+ and -). Apply a small amount of super glue to set up the regulator in the terminal block of the solar panel.
If necessary, trim the regulator’s heat-sink mount. Join the other end of the two stranded wires to the solar panel using solder again.
Step 3: Mount the Remaining Devices
In this step, you’ll need to mount the remaining devices to complete the DIY solar power system. You can use a strong double-sided adhesive to fix the USB hub and power bank behind the solar panel.
In case you want to mount the devices permanently, it’s best to use epoxy or hot glue to let them stay still. Set up the power bank and attach the solar panel’s charging cable to the power bank’s charge input.
Plug the USB hub into the power bank’s output. You can then start charging by plugging your phone into the USB hub.
Watch this video by POWER GEN on how to make a solar-powered mobile phone charger using the 6w, 6v solar panel:
Through this DIY solar charger, your communication to everyone won’t be interrupted. This can save your life if you’re in a survival situation and you want to ask for help using your phone.
Have you tried creating your own solar charger? Share your experience with us in the comments section below!
- How To Start Prepping On A Budget
- A USGI Sea Bag: The Ideal Vehicle Go Bag For You
- How To Make Ice Fishing Jigs | Step-by-Step Tutorial
Calling all preppers, craftsmen, bushmasters, outdoorsmen, and all-around skilled people, Survival Life needs YOU! Click here if you want to write for us.
Editor’s Note: This post was originally published on October 8, 2019, and has been updated for quality and relevancy.